Vertical Platform Lift

Bruno LogoTECHNICAL INFORMATION:

Rated Load: 340 kg maximum.
Number Of Passengers: 1 with mobility device.
Drive:
 
 
 
 
 
 
 
 
  • AC Powered Units:
    • 1 hp motor, 1750 rpm, single phase, 240 VAC, 60 Hz, 13.4 full load amps, 1.15 service factor, continuous duty.
  • DC Battery Powered Units:
    • Primary drive: ½ hp motor, 1750 rpm, 24 VDC permanent magnet, 20 full load amps, continuous duty.
    • 5A 24 VDC output internal battery charger, 110-240 VAC 60 Hz 3A maximum input power required.
Immediate Reduction: Dual 4L style Poly-V belts and pulleys, 3.94:1 pulley reduction.
Final Drive: 25 mm dia. ACME screw with bronze nut and bronze safety back up nut.
Motor Controller:
 
 
 
  • AC Powered Units:
    • 24 VAC relay control with 15 A circuit breaker.
  • DC Battery Powered Units:
    • 24 VDC relay control with 35 A circuit breaker.
Braking:
 
 
 
 
  • AC Powered Units:
    • Precision landing control with solenoid actuated screw braking.
  • DC Battery powered Units:
    • Precision landing control.
Standard Control:
 		 Separate up and down push button switches or paddle controls, requiring continuous operation to control unit, key switch unit.
Emergency Stop Switch:
 
 
 
 
 
 
  • Standard:
    • Red, sealed, 40 mm diameter mushroom head, push to stop, pull to reset.
  • Optional:
    • Red, sealed 40 mm diameter mushroom head, illuminated with audio alarm, push to stop, pull to reset.
Speed:
 
 
 
 
  • AC Powered Units:
    • 2.7 metres per minute maximum.
  • DC Battery Powered Units:
    • 3 metres per minute maximum.
Lifting Height:
 
 
  • Model VPL-3153 has a 1.346 metre maximum floor to floor height.
  • Model VPL-3175 has a 1.9 metre maximum floor to floor height and a 71.11 cm minimum floor to floor height.
Main Frame Construction: Welded steel tubular guide construction with formed sheet steel guarding.
Carriage Construction:
 		 Welded carriage with 50 mm dia. front and back sealed dual ball bearing wheels and adjustable low friction plastic side stabiliser guide pads.
Platform Construction:
 		 Totally enclosed side walls consisting of 25 mm tubular framing and sheet metal siding.
Under Carriage Safety: Totally enclosed bottom formed steel safety pan.
Automatic Lower Ramp: 406.4 mm long self lowering ramp.
Manual Lower Device:
 		 Optional. Manual hand crank to lower device available. Access to adaptive shaft via safety interlocked machine top cap.
Finish: Exterior grade powder coat paint.
Limit Switches: Adjustable upper and lower limit switches and upper final limit switches.
Remote Control:
 		 Optional. Station includes a separate landing call and send push button switches or paddle control and keyed on/off switch.
Top Landing Gate:
 
 
 
 		 Optional. Includes mechanical interlock which releases door, only when platform is at upper landing. Electronic sensors stop platform from operating unless door is closed. Also includes call/send push button switches or paddle controls and keyed on/off switch mounted into gate frame.
Weight of Unit:
 
 
 
 
 
 
 
 
 
  • AC Powered Units:
    • Model VPL-3153: 341.1 kg
    • Model VPL-3175: 374.2 kg.
  • DC Powered Units:
    • Model VPL-3153B: 341.1 kg (without batteries +18.14 to 36.28 kg).
    • Model VPL-3175B: 374.2 kg. (without batteries + 18.14 to 36.28 kg).
  • All models:
    • Top landing gate option: 44.9 kg.
    • Top landing wide gate option: 48.9 kg.
Click to download specifications as a PDF file (Acrobat Reader required).

Still need some further information? Then just ask us. Click here to view our contact details.

[ Go to top of page ]  [ Return to our stairlifts page ]